Baofeng UV5R Programming

The Baofeng UV-5R is one of the most popular dual band handheld two way radios on the market worldwide. It’s compact, feature packed, and very inexpensive. For many users who are new to programming portables, it is also one of the most challenging to program, primarily due to a poorly written user manual and an all but complete lack of support from its manufacturer, Baofeng.

Fortunately, there are some helpful resources available from a global community of UV-5R enthusiasts, including an easier to read and understand owner’s manual and an excellent software application designed to program the UV-5R from a computer. The programming software is called CHIRP, and it is freely available online.

Of course, CHIRP is a great solution, provided you have a computer, an easy to install programming cable and the time to input all the data for 128 channels.

CHIRP LINK
HAMCHEATSHEET
LHC NET SOI 20161202 Rev01
uv-5r_v1.0-print
UV5R Menus
Baofeng USB Programming Cable

How to use CHIRP software to Program a Baofeng UV5R Video:

How to Manually Program a Baofeng UV5R Video:

But, what if you are on the road or out in the field and don’t have a computer handy? What if you need to add in a frequency or program a channel on the fly?

So, here’s how to do it. Follow the instructions below to manually program your Baofeng UV-5R direct from the keypad of the radio.

How to manually program a simplex channel

  • Step 1. Press [VFO/MR] and enter Frequency Mode.
  • Step 2. Press [A/B] and choose the A Side (upper display).
    The A side must be used to program channels into the radio. Programming data entered on the B Side (lower display) will not be saved.
  • Step 3. Press [BAND] for the frequency band.
    Toggle [BAND] to choose 136 MHz (VHF) or 470 MHz (UHF).
    If the incorrect band is chosen for the frequency entered in Step 5, the radio will cancel the operation.
  • Step 4. Disable TDR (Dual Watch/Dual Standby).
    Press [MENU] 7 [MENU] [press up/down arrow keys] OFF [MENU] [EXIT]
    It is highly advised to turn TDR off when programming directly from the radio.
  • Step 5. Enter the frequency.
    Use the keypad to enter the frequency into the radio.
  • Step 6. optional – Enter the transmit CTCSS/DCS code.
    • CTCSS – [MENU] 13 [MENU] [enter/choose code XXXX] [MENU] [EXIT]
    • DCS – [MENU] 12 [MENU] [choose code XXXXX] [MENU] [EXIT]
  • Step 7. Assign the frequency to a channel.
    [MENU] 27 [MENU] [enter channel number XXX] [MENU] [EXIT]

How to manually program a repeater channel

  • Step 1. Press [VFO/MR] and enter Frequency Mode.
  • Step 2. Press [A/B] and choose the A Side (upper display).
    Like the simplex channels, the A side must be used to program the repeater channels into the radio. Programming data entered on the B Side (lower display) will not be saved.
  • Step 3. Press [BAND] for the frequency band
    Toggle [BAND] to choose 136 MHz (VHF) or 470 MHz (UHF).
    If the incorrect band is chosen for the frequency entered in Step 6, the radio will cancel the operation.
  • Step 4. optional – Clear any CTCSS/DCS codes previously assigned to the channel.
    If no previous codes exist or when setting up the channel for the first time and no codes are needed, set the menu items listed below to OFF.

    • RX DCS – [MENU] 10 [MENU] [enter 0 (OFF)] [MENU] [EXIT]
    • RX CTCSS – [MENU] 11 [MENU] [enter 0 (OFF)] [MENU] [EXIT]
    • TX DCS – [MENU] 12 [MENU] [enter 0 (OFF)] [MENU] [EXIT]
    • TX CTCSS – [MENU] 13 [MENU] [enter 0 (OFF)] [MENU] [EXIT]
  • Step 5. Disable TDR (DualWatch/Dual Standby).
    Press [MENU] 7 [MENU] [press up/down arrow keys] OFF [MENU] [EXIT]
    It is highly advised to turn TDR off when programming directly from the radio.
  • Step 6. optional – Delete any existing data on the channel to program.
    Skip this step when setting up the channel for the first time.
    Press [MENU] 28 [press up/down arrow keys to choose channel number] [MENU] [EXIT]
    It is highly advised to turn TDR off when programming directly from the radio.
  • Step 7. Enter the frequency.
    Use the keypad to enter the frequency into the radio.
  • Step 8. Input the repeater frequency offset.
    Press [MENU] 26 [MENU] [enter the offset for 2 meter or 70 cm repeater] [MENU] [EXIT]
  • Step 9. Enter the Transmit Frequency Shift.
    Press [MENU] 25 [MENU] [enter 1 for positive shift or 2 for negative shift] [MENU][EXIT]
  • Step 10. optional – Enter the transmit CTCSS/DCS code.
    • CTCSS – [MENU] 13 [MENU] [enter/choose code XXXX] [MENU] [EXIT]
    • DCS – [MENU] 12 [MENU] [choose code XXXXX] [MENU] [EXIT]
  • Step 11. Enter the repeater output frequency.
    Use the keypad to enter the frequency into the radio.
  • Step 12. Assign the receive frequency to the same channel in Step 6.
    [MENU] 27 [MENU] [enter channel number XXX] [MENU] [EXIT]
  • Step 13. Press the [*Scan] button to activate Reverse Mode and display the transmit frequency.
  • Step 14. Assign the transmit frequency to the channel.
    Press [MENU] 27 [MENU] [enter the same memory channel in step 12] [MENU] [EXIT]
  • Step 15. Press the [*Scan] button to exit <i.Reverse Mode.

To add more channels, simply repeat the steps above. If these step-by-step instructions are followed correctly, you should be able to program all 128 channels (000-127) in your Baofeng UV-5R as you need.